Advanced Search
Search the Knowledgebase
| Author: Microengine Views: 12588 Created: 07-10-2015 11:44 AM | 0 Rating/ Voters |
 |
This article contains steps to change card pin number when using XP-M1000x controller.
Applies To:
- XP-M1000x, XP-M1000ABX, XP-M1300X, XP-M1300ABX, XP-M1000XE, XP-M1000CPX
Resolution Summary ResolutionTo change the CardPIN, please follow steps below:
Please make sure the card is already installed. If yet to be installed, see 
How to install card user using XP-M1000x?
How to install card user using XP-M1000x?- Make sure the XP-M1000X is in Idle Mode.
ยป In Idle Mode, the LCD display is shown as below.
- Press '*' three times. The LED will be flashing and screen as below will be shown.
- Flash the card that the CardPIN needs to be changed.
- A message as below will be displayed.
- Enter the four-digit Old CardPIN.
- Screen as below will be shown.
- Enter the four-digit New CardPIN.
- Screen as below will be shown.
- Enter the four-digit New CardPIN again for confirmation.
- Screen as below will be shown to acknowledge user that the Card PIN has been successfully changed.
Custom Fields
- Summary: This article contains steps to change card pin number when using XP-M1000x controller.
- Search Tags: update, modify, change, card, pin, number, xp-m1000x
Comments
-
There are no comments for this article.
Submit Feedback on this Article
