Advanced Search
Search the Knowledgebase
| Author: Microengine Views: 16618 Created: 26-02-2015 02:38 PM | 0 Rating/ Voters |
 |
This article contains steps to install, delete and clear all cards for XP-SR200K.
Applies To:
- XP-SR200KN
- XP-SR200K
Problem Resolution Summary ResolutionInstall a new card
Delete a card
Clear all cards
Caution! Clear all cards will remove all existing records from the card database in the reader.
- Press "81".
- Key in a six digit card number or scan the new card to the reader.
- Then, press "#" button to confirm. Repeat step 2 & 3 to proceed next new card installation.
- To cancel or exit from this operation, press "*".
Delete a card
- Press "82".
- Key in a six digit card number or scan the card to be deleted to the reader.
- Then, press "#" button to confirm. Repeat step 2 & 3 to proceed delete next card.
- To cancel or exit from this operation, press "*".
Clear all cards
Caution! Clear all cards will remove all existing records from the card database in the reader.
- Press "83".
- Press "#" button to confirm to clear all Cards Database from the reader.
- To cancel or exit from this operation, press "*".
Note
» If "*" is not press, the reader is still in the Programming Mode and this indicated by Blue LED is blinking.
Custom Fields
- Summary: This article contains steps to install, delete and clear all cards for XP-SR200K.
- Search Tags: install card, delete card, clear all cards, xp-sr200k, add card, clear all records, clear all user
Comments
-
There are no comments for this article.
Submit Feedback on this Article
