Advanced Search
Search the Knowledgebase
| Author: Microengine Views: 15304 Created: 05-11-2015 05:20 PM | 0 Rating/ Voters |
 |
This article contains the steps to configure the Instruction Control for Input to trigger the Output.
Applies To:
- XP-SNET v3.48 and above, XP-CPROA
- Software xPotrtalNet v1.5
Resolution Summary ResolutionPerform steps below to configure Instruction Control.
Please ensure the Input and Output is already configured before proceed.
- Login to xPortalNet Client.
- Open Instruction Control. Go to Data Setup › System Setting › Instruction Control.
- Add new instruction control.
Fill in the fields:Field Description Code and Description Fill in the Code and Description Event ID Select unique Event ID for this instruction Group No Select unique Group No for this instruction Controller Select which controller that is connected to the input and output Alarm Priority Select the alarm priority when the event is triggered Input Source Group Click Add Input to select the Input
Group Operator- AND Mode - If all Inputs is triggered at the same time, the Outputs will be ON
- OR Mode - If any Inputs is triggered, the Outputs will be ON
Outputs- Click Add Output to select the Output
- If this message is showing, click OK.
- AND Mode - If all Inputs is triggered at the same time, the Outputs will be ON
- Click OK to confirm and save settings.Maximum Input and Output can be added in 1 Instruction is 8. Repeat this steps to add another Instruction.
- After finish configuring all settings, please download the Door Settings to the controller.
- Open Send Door Settings. Go to Device Comm › Send Door Setting.
- Finished.
| Knowledge Management Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - Rich Internet Applications) |
Custom Fields
- Summary: This article contains the steps to configure the Instruction Control for Input to trigger the Output.
- Search Tags: instruction control, how to trigger output, setup instruction control, input, output, group operator, event, instruction, alarm trigger
Comments
-
There are no comments for this article.
Submit Feedback on this Article
