There are no subcategories in this category. |
1 | How to reset the reader/ controller to factory default setting? (Coldstart) ![]() This article contains steps to reset the reader/ controller to factory default setting (Coldstart). |
2 | List of wiring connection diagram for the controllers ![]() This article contains the list of wiring connection diagram for the controllers. |
3 | After enter the 4 digit number of Auto PIN at XP-SR200K, the EM lock does not release
This article contains steps to fix the problem of XP-SR200K where the door is not release even after enter Auto PIN number. |
4 | How to add, delete and change the AutoPIN number when using XP-SR200K?
This article contains steps to add, delete and change the AutoPIN number using XP-SR200K. |
5 | How to configure Auto Lock Release TZ at XP-M1000x? (New Template)
This article contains steps to add, delete and change the AutoPIN number using XP-SR200K. |
6 | How to enter to XP-SR200K Programming Menu?
This article contains steps to enter XP-SR200K Programming Menu. |
7 | How to install, delete and clear all cards for XP-SR200K?
This article contains steps to install, delete and clear all cards for XP-SR200K. |
8 | How to reset the standalone keypad reader to factory default setting? (Coldstart)
This article contains steps to reset (Coldstart) the standalone keypad reader to default setting. |
9 | Programming instructions for XP-SR200K
This article contains steps for XP-SR200K Programming Instructions. The instructions consists of AutoPIN, MasterPIN and SuperPIN, Operation Mode, Door Open Time & Lock Release Time and Card Database. |
10 | Troubleshooting XP-SR200K/ XP-SR1000/ XP-SR40 (General hardware problem)
This article consists of the troubleshooting steps for general hardware problem of XP-SR200K/ XP-SR1000/ XP-SR40 reader. |
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - AJAX Library) |