1 | How to reset the reader/ controller to factory default setting? (Coldstart)
This article contains steps to reset the reader/ controller to factory default setting (Coldstart). |
2 | List of wiring connection diagram for the controllers
This article contains the list of wiring connection diagram for the controllers. |
3 | After enter the 4 digit number of Auto PIN at XP-SK32, the EM Lock does not release?
This article contains steps to fix the problem of XP-SK32 where the door is not released even after enter valid Auto PIN number. |
4 | After enter the 4 digit number of Auto PIN at XP-SR200K, the EM lock does not release
This article contains steps to fix the problem of XP-SR200K where the door is not release even after enter Auto PIN number. |
5 | How to access the XP-SK32 Programming Mode?
This article contains steps to access the XP-SK32 Programming Mode. |
6 | How to add, delete and change the AutoPIN number when using XP-SK32?
This article contains steps to add, delete and change the AutoPIN number when using XP-SK32. |
7 | How to add, delete and change the AutoPIN number when using XP-SR200K?
This article contains steps to add, delete and change the AutoPIN number using XP-SR200K. |
8 | How to configure Auto Lock Release TZ at XP-M1000x? (New Template)
This article contains steps to add, delete and change the AutoPIN number using XP-SR200K. |
9 | How to configure XP-MK800 Jumper Address Setting?
This article contains steps to configure XP-MK800 Jumper Address Setting. |
10 | How to connect XP-SK32 to an EM Lock?
This article contains the wiring connection diagram for XP-SK32. The connection shows how to connect the XP-SK32 to an EM Lock. |
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - AJAX Library) |