Single-Door Access Control

Knowledge Base
Advanced Search Search the Knowledgebase
1 How to reset the reader/ controller to factory default setting? (Coldstart) Featured

This article contains steps to reset the reader/ controller to factory default setting (Coldstart).

2 List of wiring connection diagram for the controllers Featured

This article contains the list of wiring connection diagram for the controllers.

3 Wiring connection for XP-M1000x using RS485 connection Featured

This article contains steps to connect XP-M1000x reader using RS485 connection.

4 Basic new setup (connection, controller, and door(s)) using xPortal3000 wizard

xPortal3000 provided Startup Wizard to setup Door Access System easily. This article contains steps to setup new connection, controller and door(s) using the wizard.

5 Can I install new user at XP-GT/ XP-GTR without using the card?

Our door access system can support Mifare/ Proximity card and ID number for door access. This article contains steps to install new user at the XP-GT/ XP-GTR without using card.

6 Can XP-GTR1200L read Mifare card?

This article contains information about card type that can be supported using XP-GTR/ XP-GT controller model.

7 Cannot use AutoPIN using XP-GT/ XP-GTR

This article contains solution to solve issue cannot use AutoPIN using XP-GT/ XP-GTR controller.

8 Configuration Setup for XP-M1000x (Car Park Mode)

This article contains the configuration setup for XP-M1000x using Car Park Mode.

9 Door is not release after received Fire Alarm Signal from the master controller

This article contains steps to solve problem when door is closed after received Fire Alarm Signal.

10 Double leaf door is not release/ 1 door only release

This article contains wiring connection diagram of XP-M1000x for double leaf door to solve the issue door is not release.