XP-M1000i
| There are no subcategories in this category. |
- Top
- Controller
- Encrypted IP Controller
- M Series
- XP-M1000i
| 11 | How to configure Global AntiPassback Controller (GAC)?
This article contains steps to configure the Global AntiPassback Controller (GAC). This feature is to enable AntiPassback function across controller. User must configure the GAC Server (XP-SNET) and GAC Client (XP-M1000i v2/ XP-M2000i) in order to enable the feature at site. |
| 12 | How to configure Guard Tour Door using xPortalNet?
This article contains steps to configure Guard Tour Door using xPortalNet. |
| 13 | How to configure network setting for XP-M1000i controller?
This article contains steps to setup the network connection for XP-M1000i controller. The communication shall up between the controller and the xPortal software after completed this setup. |
| 14 | How to configure the XP-M1000i controller using RS485/ RS232 connection?
This article contains steps to setup the connection for XP-M1000i controller using RS485/ RS232. The communication shall up between the controller and the xPortal software after completed the setup. |
| 15 | How to enable antipassback settings for single-door controller?
This article contains steps to enable AntiPassback settings for single-door controller. AntiPassback function is to prevent Double Entry or Double Exit access through a door or area. |
| 16 | How to reset the XP-M1000i controller to factory default setting? (Coldstart)
This article contains steps to reset (Coldstart) the XP-M1000i controller to default setting. |
| 17 | How to setup Communication Gateway (Polling Agent)?
This article contains steps to setup Communication Gateway (Polling Agent). |
| 18 | How to setup gateway configuration using MOXA - NPort Administrator?
This article contains steps to setup the gateway configuration using MOXA - NPort's Administrator. |
| 19 | How to setup gateway configuration using MOXA - NPort’s Web Console?
This article contains steps to setup the gateway configuration using MOXA - NPort's Web Console. |
| 20 | Lock always released. LED next to Relay 1 or Relay 2 on board always ON
This article contains steps to solve problem where lock always release. |
Follow MicroEngine
About Us
MicroEngine was established in December 2000. The company formed a mission in providing total computerized solution and superior services for the Security Access Control Industry needs to enhance corporate image.
Newsletter
Subscribe to our email newsletter for useful tips and valuable resources.
Video
