M Series

This article contains steps to configure Fire Alarm Release using xPortalNet software.

This article contains steps to configure the Global AntiPassback Controller (GAC). This feature is to enable AntiPassback function across controller. User must configure the GAC Server (XP-SNET) and GAC Client (XP-M1000i v2/ XP-M2000i) in order to enable the feature at site.

This article contains steps to configure Guard Tour Door using xPortalNet.

This article contains steps to setup the network connection for XP-M1000i controller. The communication shall up between the controller and the xPortal software after completed this setup.

This article contains steps to setup the network connection for XP-M2000i controller. The communication shall up between the controller and the xPortal software after completed the setup.

This article contains steps to setup the connection for XP-M1000i controller using RS485/ RS232. The communication shall up between the controller and the xPortal software after completed the setup.

This article contains steps to setup the connection for XP-M2000i controller using RS485/ RS232. The communication shall up between the controller and the xPortal software after completed the setup.

This article contains steps to enable antipassback settings for multi-door controller.

This article contains steps to enable AntiPassback settings for single-door controller. AntiPassback function is to prevent Double Entry or Double Exit access through a door or area.

This article contains steps to reset (Coldstart) the XP-M1000i controller to default setting.