1 | How to reset the reader/ controller to factory default setting? (Coldstart)
This article contains steps to reset the reader/ controller to factory default setting (Coldstart). |
2 | List of wiring connection diagram for the controllers
This article contains the list of wiring connection diagram for the controllers. |
3 | "Enrolment of Mifare card failed!"
This article contains solution of "Enrolment of Mifare card failed". |
4 | "Invalid PIN Access"/ "Invalid PIN!" after enter Auto PIN number
AutoPIN Operation Mode allows user to access a door by supplying a valid four-digit AutoPIN without the needs to use card. This article contains steps to solve the problems when using Auto PIN number. |
5 | "The bulk write card task has been halted due to error!"
This article contains solution of "The bulk write card task has been halted due to error!" |
6 | After enter the 4 digit number of Auto PIN at XP-SK32, the EM Lock does not release?
This article contains steps to fix the problem of XP-SK32 where the door is not released even after enter valid Auto PIN number. |
7 | After enter the 4 digit number of Auto PIN at XP-SR200K, the EM lock does not release
This article contains steps to fix the problem of XP-SR200K where the door is not release even after enter Auto PIN number. |
8 | Bulk Write Card description
This article contains the description of the "Bulk Write Card" window. |
9 | Get error message "Invalid [Programming Mode]" when saving the Mifare Card Options settings
This article contains solution of problem on saving Mifare Card Options settings. |
10 | Get error message "The card no. detected already exist in the software database" when add Card Serial No
This article contains solution of problem card no detected already exist in the software database. |
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - AJAX Library) |