Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
Door is not release after received Fire Alarm Signal from the master controller
Author: Microengine Views: 14715 Created: 27-05-2016 05:33 PM 0 Rating/ Voters

This article contains steps to solve problem when door is closed after received Fire Alarm Signal.

Applies To:

  • Any controllers which support Fire Alarm   
  • Software xPortalNet v1.5 
 Problem
 
› Door is not release after received Fire Alarm Signal from the master controller.   
       
 Symptoms
 
 EM Lock/ Door is in closed condition after Fire Alarm triggered.
         
 Cause (optional)
 

› Fire Alarm Door Release is not enable.
› Door's controller is not 
selected at the Fire Alarm Group.

 Resolution Summary
 
› Please check the fire alarm configuration setup from the software. See small How to configure Fire Alarm Release & Fire Alarm Group?    
Custom Fields
  • Summary: This article contains steps to solve problem when door is closed after received Fire Alarm Signal.
  • Search Tags: fire, alarm, fire alarm release, door closed, fire alarm trigger
Comments
  • There are no comments for this article.
Submit Feedback on this Article