Advanced Search
Search the Knowledgebase
| Author: Microengine Views: 13123 Created: 26-02-2016 02:59 PM | 0 Rating/ Voters |
 |
This article contains steps to set Auto Lock Release TZ at XP-M1000x.
Applies To:
- XP-M1000x, XP-M1000ABX, XP-M1300X, XP-M1300ABX, XP-M1000XE, XP-M1000CPX
- XP-SR1000
Resolution Summary ResolutionPerform steps below to set the Auto Lock TZ.
- Enter
Programming Mode. - Press '1' for Sys menu.
- Press '2' for Door Para. The screen below will be displayed:
- Press '#' to proceed to the next item.
- Continue doing this until the 'ALRTz' menu displayed.
- Set the Time Zone Code for the door will be automatically open/ release.
- Modify the values for the item displayed by keying in a new value or pressing '0' to toggle between settings.
- Press '#' to proceed to the next item.
- Continue doing this until the Save Changes page is displayed.
- Press '#' to save changes and exit from the Door Parameter setting.
The changes will not be saved if the configuration is interrupted midway. - Finished.See How to setup Auto Lock Release Time Zone at xPortal software? to configure the Auto Lock Release function at the software.
Custom Fields
- Summary: This article contains steps to set Auto Lock Release TZ at XP-M1000x.
- Search Tags: auto lock release time zone, alrtz, how to set auto lock release time zone, door release, door open, automatically door open, automatically door release
Related Articles
Comments
-
There are no comments for this article.
Submit Feedback on this Article
