Below is the details description of the "Bulk Write Card" window:
1. Staff List Grid
Selected staff records will be listed as shown from figure above. The description of the additional fields added as described in the table below:
Field |
Description |
Card Serial No. |
Card Serial No. of the card will be shown here once it is placed on the programmer. |
Status |
Indicate the status of the programming process:
- Pending
- Processing
- Success
- Aborted
- Failed
|
Error Desc. |
Will show the error description if the card failed to be programmed or aborted by user. |
2. Card Programming Options
There are 2 options provided before start the card programming. Below is the description on each options:
Field |
Description |
Halt processing if exception trapped
|
If checked:
- The software will halt the card programming if any problem occurred in the middle of the process.
- The card programming will be resume after click on Restart for Fail Cases button.
- The card will not jump to other staff records to be program until the current fail cases is restarted.
If unchecked:
- If any problem occurred in the middle of the card programming, the software will prompt to place card for the next records. Current card programming records status will be failed.
- User may program back the failed records by clicking on Restart for Fail Cases button. But, this can only be perform after all records in the list has completed the card programming process.
|
Verify card after written |
- The purpose of this verification is to verify whether data is written correctly. This option is enabled by default.
- Please uncheck this option in order to skip the verification and to speed up the programming process
|
3. Programming Button
These are the buttons you may use during card programming. Description of each button as shown in the table below:
Button |
Description |
|
To restart card programming for any failed cases. |
|
To start the card programming. |
|
To abort the card programming. |
|
To show/ hide the progress details at the bottom. |
4. Progress Area
The progress details of Card No. programming will be shown in this area. Below is example progress of the card enrollment: