Call us at (+603) 7954 0820 / (+65) 6570 8832

Knowledge Base

Knowledge Base
Subscribe to Comments Subscribe to Comments
Subscribe to Updates Subscribe to Updates
Export to PDF Export to PDF
Add to My Favorites Add to My Favorites
Remove from Favorites Remove from Favorites
Was this page helpful? View My Favorites
Was this page helpful? Rate It!
Advanced Search Search the Knowledgebase
Print Article Print Article      Email to a Friend Email to a Friend
How to connect Fire Alarm to XP-CPROA alarm controller?
Author: Microengine Views: 29496 Created: 23-06-2015 12:37 PM 0 Rating/ Voters

This article contains steps to connect the Fire Alarm Panel to XP-CPROA alarm controller.   

Applies To:

  • XP-CPRO5A, XP-CPRO10A    
  • Software xPortal2005, xPortal2007, xPortalNet, xPortal3000
 Resolution
 

To connect XP-CPROA alarm controller with Fire Alarm, several setup need to be done which are:

  1. Configure Wiring Connection
    1. Configure the wiring connection from Fire Alarm Panel to XP-CPRO.
    2. Ensure the door that is connected to the Fire Alarm Input is connected properly to the controller.

  2. xPortal Server Setup
    1. Configure the Controller (Including Connection and Door Setup).
    2. Enable the Fire Alarm Door Release from the System Properties Setup.

  3. xPortal Client Setup
    1. Download Door Setting to the controller.
 Resolution
 

Perform this steps to configure fire alarm using XP-CPROA:


  1. Please connect the Fire Alarm Panel to XP-CPRO correctly.
  2. Then, make sure the door that is connected to the Fire Alarm Input is connected properly to the controller.


  1. Run xPortal Server.
  2. Configure server setup as shown below accordingly.
  3. Make sure the setting of Fire Alarm Door Release is Enabled.
Connection Setup

  1. Open Connection Setup. Go to Server Admin › Connection Setup.
  2. Add one connection.


  3. Click OK to confirm and save the settings.

Controller Setup

  1. Open Controller Setup. Go to Server Admin › System Device Setup › Controller.
  2. Add one controller.


  3. Click OK to confirm and save the settings.

Door Setup (For MK800)

  1. Open Door Setup. Go to Server Admin › System Device Setup › Door.
  2. Add one door as shown below. 
  3. Make sure the Unit No is set according to the Reader Interface (MK800) Jumper Address Setting.
    small How to configure XP-MK800 Jumper Address Setting?

  4. Click OK to confirm and save the settings.


System Properties Setup

  1. Open System Properties Setup. Go to Server Admin › System Properties.
  2. Enable the Fire Alarm Door Release by selecting "Yes".


  3. Click OK to confirm and save the settings.


  1. Login to xPortal Client.
  2. Open Send Door Setting. Go to Device Comm › Send Door Setting › Send All Settings.
  3. Download door settings to the controller accordingly.
Custom Fields
  • Summary: This article contains steps to connect the Fire Alarm Panel to XP-CPROA alarm controller.
  • Search Tags: fire alarm trigger on, door not released, door not open, xp-cproa, fire alarm, fire alarm door release, fire alarm input, xp-mk800, mk800, mk-800, mk
Related Articles
  1. How to configure XP-MK800 Jumper Address Setting?
Comments
  • There are no comments for this article.
Submit Feedback on this Article

Follow MicroEngine

About Us

MicroEngine was established in December 2000. The company formed a mission in providing total computerized solution and superior services for the Security Access Control Industry needs to enhance corporate image.

Newsletter

Subscribe to our email newsletter for useful tips and valuable resources.

Email Address *

Name *

Video

More Videos

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.

Business Knowledge Management by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - AJAX Technology)