Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
What is the meaning of the symbol on the XP-GT/ XP-GTR controller?
Author: Microengine Views: 9826 Created: 12-06-2015 10:25 AM 0 Rating/ Voters

This article contains information about the meaning of each symbol at the XP-GT/ XP-GTR controller.

Applies To:

  • XP-GT1200L, XP-GT3200L, XP-GT1200LABX, XP-GT3200LABX, XP-GT3200LE, XP-GT3200LCPX, XP-GT500LE, XP-GTR1200L, XP-GTR3200L
 Problem
 

› How can I know the AntiPassBack/ CardLockOut is enabled? 
 Which symbol to determine the controller is in Higher Security Mode (Card+PIN mode)?  
 How can I know the controller’s security is turned on/ off?
 Which symbol is to determine the controller’s uplink/ downlink is established?

 Resolution
 

Refer to the table description below for the meaning of symbol on XP-GT/GTR controller.

FieldDescription
small

AntiPassBack
AntiPassBack Mode enabled. Once enabled, the user will not be able to use the same card to gain access through the same direction repeatedly without gaining access on the opposite direction.
small

CardLockOut
CardLockOut Mode enable. Once enabled, the token will be locked permanently after failure to gain access for three consecutive times. The failure might be caused by wrong pin number, wrong time zone or anti pass back violations.
small

Higher Security 
(Card+PIN)
In Higher Security Mode, users need to enter the comply to the pre-set verification mode after to gain access. This provides higher security.

small How do I change controller's verification mode to Card+Pin mode at software?
small

Security On
Security Mode enabled. Users must adhere to the verification mode settings to gain access.
small

Security Off
Security Mode disabled, which will cause the lock to be permanently released.
small

Uplink Communication
Communication has been established with the remote server to allow the sending and receiving of data when this icon is blinking.

small I have just installed a new XP-GT/ XP-GTR controller but it shown down in Device List (Lock is not respond – Uplink failed)
small

Downlink Communication
Communication has been established with the relay board when this icon appears.

small I have just installed a new XP-GT/ XP-GTR controller but it shown down in Device List (Lock is not respond – Downlink failed)
Custom Fields
  • Summary: This article contains information about the meaning of each symbol at the XP-GT/ XP-GTR controller.
  • Search Tags: anti passback, card lockout, higher security, security on, security off, uplink communication, downlink communication, xp-gt, xp-gtr
Comments
  • There are no comments for this article.
Submit Feedback on this Article