Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
How to set the door back to normal operation when all doors are released after a Fire Alarm is triggered?
Author: Microengine Views: 10068 Created: 01-06-2015 03:29 PM 0 Rating/ Voters

This article contains steps to reset the Fire Alarm triggered status back to normal operation.  

Applies To:

  • Software xPortal2005
  • Software xPortalNet
  • Software xPortal3000
 Problem
 

› How to reset the fire alarm triggered status and set the door back to normal operation? 

       
 Symptoms
 

 All doors are released. 
 Security off.

         
 Cause (optional)
 

 Fire Alarm was triggered.

         
 Resolution Summary
 

Perform steps below to turn on the door security.

› Send Security On to all doors released.

  1. Login to xPortal Client software.
  2. Open Send Door Command. (Go to Device Comm › Send Door Command)
  3. Select doors name and click Security On button.

  4. Observe the Fire Alarm Status at Controller List. The status should be changed from Armed to Alarm.
Custom Fields
  • Summary: This article contains steps to reset the Fire Alarm triggered status back to normal operation.
  • Search Tags: fire alarm triggered, reset door release status
Comments
  • There are no comments for this article.
Submit Feedback on this Article