Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
What is the default IP address for the XP-SNET/ XP-M1000i/ XP-M2000i controller?
Author: Microengine Views: 27039 Created: 20-05-2015 03:09 PM 0 Rating/ Voters

This article contains the default IP address to access Web Diagnostic for XP-SNET, XPM1000i and M2000i controller.

Applies To:

  • XP-SNET
  • XP-SNET GAC
  • XP-M1000i
  • XP-M2000i
 Problem
 

› Don’t know controller’s IP Address.    

       
 Symptoms
 

 Cannot open Web Diagnostic.
 Forgot default IP Address.

         
 Cause (optional)
 

 IP Address of the controller already changed from the default value.

         
 Resolution Summary
 

 Enter default IP Address. 
 Perform Coldstart.

         
 Resolution
 

Please perform steps below to resolve the issue:

  1. Enter default IP Address to access Web Diagnostic:
    › The password to access Web Diagnostic is not shown here for security purpose. Kindly ask your dealer for the information.
    • XP-SNET: 192.168.1.210
    • XP-SNET GAC: 192.168.1.220
    • XP-M1000i/ XP-M2000i: 192.168.1.10
  2. If failed to access the Web Diagnostic, please perform Coldstart to reset the controller to factory default setting:

Custom Fields
  • Summary: This article contains the default IP address to access Web Diagnostic for XP-SNET, XPM1000i and M2000i controller.
  • Search Tags: default ip address, xp-snet, xp-m1000i, xp-m2000i, cannot open web diagnostics, password, password web diagnostic
Comments
  • There are no comments for this article.
Submit Feedback on this Article