Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
Wiring connection diagram for XP-CPRO
Author: Microengine Views: 25616 Created: 05-05-2015 03:40 PM 0 Rating/ Voters

This article contains the wiring connection diagram for XP-CPRO.

Applies To:

  • XP-CPRO
 Resolution Summary
 

Basic connection for the controller to communicate with the software:

  1. Please connect the controller's power terminal to the power supply.
  2. Please configure the uplink and downlink connection.
  3. Follow the wiring connection diagram to connect the other terminal correctly.
 Resolution
 

Please follow the following wiring connection diagram.

For high resolution image, please download the attached wiring diagram at the end of this article.


Controller Wiring Connection Diagram


Field Description
1 Please connect terminal +12V and 0v to Power Supply (12VDC 3A)
2 Uplink Connection:
  • Please connect the PC+ and PC- terminal at XP-CPRO controller to the the terminal C+ and C- from MCI.
3 Downlink Connection:
  • Please connect the RC+ and RC- terminal at XP-CPRO controller to the the terminal C+ and C- from MK.
  • Please connect the reader at the MK board. See small Reader Wiring Connection Diagram below.
4 Set the address on XP-CPRO
  • Find ADDRESS on the board. 
  • Toggle the DIP Switch to set the controller's address (Each address must be unique)

    * Follow 
    DIP Switch Address Settings table to set the address.




Reader Wiring Connection Diagram



1 Reader Interface (MK800) can be used for 1 door only. Please use other MK800 for the next door.

Field Description
1 Please connect terminal +12V and 0v to Power Supply (12VDC 3A)
2 Please connect the RC+ and RC- terminal at XP-CPRO controller to the the terminal C+ and C- from MK
3 Please set the address for the MK (Associated to the Door Unit No).
  • Follow Jumper Address Settings table to set the address.
4 Please connect the reader:
  • If using XP-RDPRX reader, please connect the reader according to its wire color.
  • If using XP-Plato reader, please connect the data + (Orange wire) and data - (Grey wire) to the terminal DC+ and DC-. Connect the power 12V (Red wire) and 0V (Black wire) to the terminal VPP and 0V.
    small
5 Please connect the Push Button, Door Sensor and EM Lock according to the wiring connection.
  1. Please configure the wiring connection according to the table above.
  2. After complete the configuration, please run software and configure the software settings. 
    If user just received controller after repair, please small Coldstart the controller to reset the settings to default.
Attachments
mk800-wiring-diagram.pdf 0.1 Mb Download File
xp-cpro-multidoor-controller-wiring-diagram.pdf 38.7 Kb Download File
Custom Fields
  • Summary: This article contains the wiring connection diagram for XP-CPRO.
  • Search Tags: wiring diagram xp-cpro, mk800, drawing, xp-cpro wiring, xp-mk800, mk800, mk-800, mk, wiring connection
Comments
  • There are no comments for this article.
Submit Feedback on this Article