Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
How to reset the XP-CPRO controller to factory default setting? (Coldstart)
Author: Microengine Views: 8824 Created: 05-05-2015 11:14 AM 0 Rating/ Voters

This article contains steps to reset (Coldstart) the XP-CPRO controller to default setting. 

Applies To:

  • XP-CPRO5, XP-CPRO10  
 Resolution Summary
 

Coldstart is perform to reset the controller to default factory setting.

Warning! Coldstart will erase all the memory in the controller and reset all the settings to default settings. Skip this step if you did not wish to reset the controller. 

 Resolution
 

Performing Coldstart will reset the XP-CPRO controller to manufacturer settings. To perform a Coldstart, please follow the steps below:

  1. Press the Coldstart & Reset button at the board of the controller.
  2. After 2 seconds, release the Reset button only and wait until "Coldstart" message showed on the LCD.
  3. Then, only release the Coldstart button.
    Default Baud Rate setting after Coldstart is OFF (2400bps).
Custom Fields
  • Summary: This article contains steps to reset (Coldstart) the XP-CPRO controller to default setting.
  • Search Tags: coldstart xp-cpro, reset to default setting, clear all records
Comments
  • There are no comments for this article.
Submit Feedback on this Article