Knowledge Base

Add AutoPIN
› Add 1 set of AutoPIN ^{(if it is a new reader)}.

1. Press "01" which is 1st set of AutoPIN.
2. Enter 4 digits AutoPIN number.
3. Press "#" to confirm.
4. Press "02" to proceed to add 2nd set of AutoPIN then repeat the Step 1.
5. To cancel or exit from this operation, press "*".
   ^{» You may add AutoPIN up until 10 sets. Please enter 2 digits number between 01 and 10.}

Delete AutoPIN
› Delete 1 set of programmed AutoPIN.

1. Press the 2 digits number ^{(Between 01 and 10)} of the location number of AutoPIN at the keypad button.
   ^{» Eg: 01 = 1st set of AutoPIN}
   
2. Enter "0000" and press "#" to confirm.
3. To cancel or exit from this operation, press "*".
   
   

Change AutoPIN
› Change 1 set of AutoPIN number.

1. Refer to the Step Delete AutoPIN above to Delete the programmed AutoPIN.
2. Press the 2 digits number ^{(Between 01 and 10)} of the location number or AutoPIN at the keypad button.
   ^{» Eg: 01 = 1st set of AutoPIN}
   
3. Enter 4 digits new AutoPIN number and press "#" to confirm.
4. To cancel or exit from this operation, press "*".