Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
How to install, delete and clear all cards for XP-SR200K?
Author: Microengine Views: 9433 Created: 26-02-2015 02:38 PM 0 Rating/ Voters

This article contains steps to install, delete and clear all cards for XP-SR200K.

Applies To:

  • XP-SR200KN
  • XP-SR200K 

 Problem
 

› How to install, delete and clear all cards for XP-SR200K?   

       
 Resolution Summary
 

Follow steps below:

Resolution 1:
› Install a new card

Resolution 2:
› Delete a card

Resolution 3:
› Clear all cards 

         
 Resolution
 

Enter to Programming Mode

Install a new card

  1. Press "81".
  2. Key in a six digit card number or scan the new card to the reader.
  3. Then, press "#" button to confirm. Repeat step 2 & 3 to proceed next new card installation.
  4. To cancel or exit from this operation, press "*".



Delete a card

  1. Press "82".
  2. Key in a six digit card number or scan the card to be deleted to the reader. 
  3. Then, press "#" button to confirm. Repeat step 2 & 3 to proceed delete next card.
  4. To cancel or exit from this operation, press "*".



Clear all cards
Caution! Clear all cards will remove all existing records from the card database in the reader. 

  1. Press "83".
  2. Press "#" button to confirm to clear all Cards Database from the reader.
  3. To cancel or exit from this operation, press "*".

small Note
» If "*" is not press, the reader is still in the Programming Mode and this indicated by Blue LED is blinking.

Custom Fields
  • Summary: This article contains steps to install, delete and clear all cards for XP-SR200K.
  • Search Tags: install card, delete card, clear all cards, xp-sr200k, add card, clear all records, clear all user
Comments
  • There are no comments for this article.
Submit Feedback on this Article