Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
How to add, delete and change the AutoPIN number when using XP-SK32?
Author: Microengine Views: 14935 Created: 26-02-2015 11:13 AM 0 Rating/ Voters

This article contains steps to add, delete and change the AutoPIN number when using XP-SK32.

Applies To:

  • XP-SK32   
 Problem
 

› How to add, delete and change the AutoPIN number when using XP-SK32?   

       
 Resolution Summary
 
Resolution 1: Add AutoPIN
Resolution 2: Delete AutoPIN
Resolution 3: Change AutoPIN
 
         
 Resolution
 

Enter to Programming Menu

Add AutoPIN
Add 1 set of AutoPIN (If it is a new reader).

  1. Press "01" which is 1st set of AutoPIN
    (Max. up to 32 set can be stored)
  2. Enter 4 digits AutoPIN number. Press "#" to confirm.
  3. Press "02" to proceed to add 2nd set of Auto PIN then repeat the step 2.
  4. To cancel or exit from this operation, press "*".



Delete AutoPIN

› Delete 1 set of programmed AutoPIN.

  1. Press the 2 digits number (between 01 and 32) of the location number of AutoPIN at the keypad button.
    (Eg: 01 = 1st set of AutoPIN)
  2. Enter "0000" and press "#" to confirm.
  3. To cancel or exit from this operation, press "*".



Change AutoPIN

› Change 1 set of AutoPIN number.

  1. Press the 2 digits number (between 01 and 32) of the location number of AutoPIN at the keypad button.
    (Eg: 01 = 1st set of AutoPIN)
  2. Enter 4 digits new AutoPIN number and press "#" to confirm.
  3. To cancel or exit from this operation, press "*".  
Custom Fields
  • Summary: This article contains steps to add, delete and change the AutoPIN number when using XP-SK32.
  • Search Tags: xp-sk32, add autoPIN, delete autoPIN, change autoPIN
Comments
  • There are no comments for this article.
Submit Feedback on this Article