M Series

Knowledge Base
Advanced Search Search the Knowledgebase
Knowledge Base
1 How to reset the reader/ controller to factory default setting? (Coldstart) Featured

This article contains steps to reset the reader/ controller to factory default setting (Coldstart).

2 List of wiring connection diagram for the controllers Featured

This article contains the list of wiring connection diagram for the controllers.

3 "Invalid PIN Access"/ "Invalid PIN!" after enter Auto PIN number

AutoPIN Operation Mode allows user to access a door by supplying a valid four-digit AutoPIN without the needs to use card. This article contains steps to solve the problems when using Auto PIN number.

4 Basic new setup (connection, controller, and door(s)) using xPortal3000 wizard

xPortal3000 provided Startup Wizard to setup Door Access System easily. This article contains steps to setup new connection, controller and door(s) using the wizard.

5 Door is not release after received Fire Alarm Signal from the master controller

This article contains steps to solve problem when door is closed after received Fire Alarm Signal.

6 How can I use Card+Pin Mode for XP-M1000i controller?

This article contains steps to apply Card+Pin Mode for XP-M1000i controller.

7 How to configure address setting (Unit No) for Multi-Door Controller?

This article contains steps to configure the address setting for Multi-Door Controller.

8 How to configure Auto Lock Release TZ at XP-M1000x? (New Template)

This article contains steps to configure the address setting for Multi-Door Controller.

9 How to configure car park application using XP-M2000i?

This article contains steps to configure the car park application using XP-M2000i.

10 How to configure controller using MV-25 LAN interface unit?

This article provide the link to configure controller using MV-25 LAN (Local Area Network) interface unit for different controller models.

1 2 3 4 Next