Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
Can I install new user at XP-GT/ XP-GTR without using the card?
Author: Microengine Views: 25089 Created: 27-03-2015 12:10 PM 0 Rating/ Voters

Our door access system can support Mifare/ Proximity card and ID number for door access. This article contains steps to install new user at the XP-GT/ XP-GTR without using card.

Applies To:

  • XP-GT1200L/ XP-GT3200L
  • XP-GT1200LABX/ XP-GT3200LABX    
  • XP-GT3200LE
  • XP-GT3200LCPX
  • XP-GT500LE
  • XP-GTR1200L/ XP-GTR3200L
 Problem
 

› Can I install new user without using the card?          

         
 Symptoms
 
 I want to use ID number as my Token Type.

         
 Resolution
 

Perform this steps if this is a standalone controller. (Not connected with software)

› If you are using software, please add the staff record from the software accordingly. 
› See AA-00584 to learn to add staff using ID Number at the software. 

  1. There are 4 available options of user type when add user at XP-GT and XP-GTR controller:
    • [0] for Prox Card
    • [1] for ID No.
    • [2] for Mifare (Contactless Smart Card)
    • [3] for MyKad
  2. You may select option [1] if you wish to add user using ID Number.


› 
To add a user using ID No, please follow steps below:

  1. Enter Programming ModeKey in "*" (asterisk)  followed by 6 digits Master PIN. 
  2. Press '2' for Database menu.
  3. Press '2' for Add User. This will bring us to the Add User screen.
    small

  4. Select the user type [1] in this screen.
  5. Press 'small' to accept and proceed to the next screen.
  6. Enter the User ID in this screen. Press 'small' to confirm.
    small

  7. Enter the TimeZone No. for this user. Press 'small' to confirm.
    small

  8. Choose to allow 1:N Operation for this user. Press 'small' to confirm.
    small
    » If you choose NO, you will not be able to use finger print if you have select any finger print mode as your Verification Mode(This setting cannot be changed after saved).
  9. This screen allows you to select the Verification Mode for the user. Enter a number to choose the Verification Mode. There are 7 modes to choose from:
    • [0] is by door (The verification mode for the user will be according to the current verification mode of the door entered/ exited)
    • [1] by Token only
    • [2] is by Token and Pin
    • [3] is by Token and Finger print
    • [4] is by Token, Pin and Finger print
    • [5] is by Finger print only
    • [6] is by Finger print and Pin

      small
      » Token – Is card or ID number depends on selected Token Type.
  10. A confirmation that the new user is installed will appear as shown in the screen below, should all the information entered is correct and valid. 
  11. Repeat steps 3 to 9 to add a new user, or press '×' to return to Database Menu.
    small

Custom Fields
  • Summary: Our door access system can support Mifare/ Proximity card and ID number for door access. This article contains steps to install new user at the XP-GT/ XP-GTR without using card.
  • Search Tags: install id number,xp-gt, xp-gtr, install staff without card
Comments
  • There are no comments for this article.
Submit Feedback on this Article