Knowledge Base

Knowledge Base
Advanced Search Search the Knowledgebase
Programming instructions for XP-SR200K
Author: Microengine Views: 42285 Created: 02-03-2015 05:37 PM 100 Rating/ 1 Voters

This article contains steps for XP-SR200K Programming Instructions. The instructions consists of AutoPIN, MasterPIN and SuperPIN, Operation Mode, Door Open Time & Lock Release Time and Card Database.

Applies To:

  • XP-SR200KN
  • XP-SR200K
  • XP-SR1000
 Resolution Summary
 

› Make sure the wiring connection is correct.   
 Enter to Programming Menu to perform preferred Programming Mode.       

         
 Resolution
 

Please complete the following steps below in order to resolve your issue. 

  1. Please make sure the wiring connection is correct.
    1. See AA-00244 for the correct wiring connection diagram for XP-SR200K.
    2. See AA-00432 for the correct wiring connection diagram for XP-SR1000.

  2. Enter to Programming Menu
    1. See AA-00260 for the steps.

  3. Please follow any preferred steps below after entering the Programming Menu.   
    AutoPINSteps
    01...10: AutoPIN Location
    › Location number of 10 sets of AutoPIN.
     Enter 0000 to erase the programmed AutoPIN.

    1. Enter 2 digits number between 01 and 10.
    2. Key in the 4 digits AutoPIN number.
    3. Press # to confirm.

    MasterPIN and SuperPIN Steps
    51: MasterPIN
     To change the MasterPIN number.


    1. Press 51.
    2. Key in the new 6 digits MasterPIN.
    3. Press # to confirm.

    52: SuperPIN
     To change the SuperPIN number.


    1. Press 52.
    2. Key in the new 6 digits SuperPIN.
    3. Press # to confirm.

     Operation Mode Steps
    61: AutoPIN Mode
     To enable or disable AutoPIN mode.
     After Coldstart, AutoPIN mode is OFF.

    1. Press 61.
    2. Press 1 to enable or 0 to disable AutoPIN mode.
    3. Press # to confirm.

    62: Security Mode
     To turn ON or OFF security mode.


    1. Press 62.
    2. Press 1 for ON or 0 for OFF.
    3. Press # to confirm.

    63: Card+PIN Mode
     To turn ON or OFF Card+PIN mode.


    1. Press 63.
    2. Press 1 for ON or 0 for OFF.
    3. Press # to confirm.

    64: Card Lock Out Mode
     To turn ON or OFF Card Lock Out mode.


    1. Press 64.
    2. Press 1 for ON or 0 for OFF.
    3. Press # to confirm.
     Door Open Time & Lock Release Time Steps
    71: Door Open Time
     Specifies the duration for the door to be left open before the buzzer sounds.

    1. Press 71.
    2. Enter the required duration (0 - 99 sec.).
    3. Press # to confirm.

    72: Lock Release Time
     Specifies the duration, after which the EM lock returns to locked state after being released.

    1. Press 72.
    2. Enter the required duration (0 - 99 sec.).
    3. Press # to confirm.

     Card Database Steps
    81: Install Card
     To program new cards to the system.




    1. Press 81.
    2. Key in a six digit card number or scan the new card to the reader.
    3. Press # to confirm.
    4. Press * to cancel operation.

    82: Delete Card
     To delete an existing card.




    1. Press 82.
    2. Key in a six digit card number or scan the card to be deleted to the reader.
    3. Press # to confirm.
    4. Press * to cancel operation.

    83: Clear User DB
     To clear the ENTIRE card database.



    1. Press 83.
    2. Press # to confirm the clearing of the ENTIRE card database in the reader.
    3. Press * to cancel operation.

Custom Fields
  • Summary: This article contains steps for XP-SR200K Programming Instructions. The instructions consists of AutoPIN, MasterPIN and SuperPIN, Operation Mode, Door Open Time & Lock Release Time and Card Database.
  • Search Tags: xp-sr200k, programming instructions, autoPIN location, masterPIN, superPIN, autoPIN mode, security mode, card+PIN mode, card lock out mode, door open time, lock release time, install card, delete card, clear user db, add card, clear all records, clear all user
Comments
  • There are no comments for this article.
Submit Feedback on this Article