Advanced Search
Search the Knowledgebase
| Author: Microengine Views: 29759 Created: 04-12-2014 10:01 PM | 0 Rating/ Voters |
 |
This article provides answer to question how to enable and configuring the High Security Mode (Card+Pin Mode).
Applies To:
- Software xPortal2005, xPortal2007, xPortalNet, xPortal3000
Resolution Summary Resolution- Login to client software.
- Add/ modify staff record.
- Go to Data Setup › Access Data Setting › Staff Records.
- For xPortal3000, go to Staff Records.
- At Verification Mode, select "By Door".
- Click OK to confirm and save settings.
- Open Door Setup.
- Go to Data Setup › System Setting › Door.
- For xPortal3000, go to Control Panel › Door › Advanced Settings.
- At Higher Security Mode, select "Token Type + PIN".
- At Higher Security TZ*, select preferable Time Zone. The controller's verification mode Card+Pin will be activated according to this Time Zone.
- Default Time Zone available are "000" and "001". See
How to configure Time Zone in xPortal Client software? to create new Time Zone.Time Zone "000" is No Access at anytime whereas "'001" is Free Access at anytime. - After activated this mode, user must always flash card and enter PIN number at selected Time Zone.
- Click OK to confirm and save settings.
- To disable this settings, set the Higher Security TZ* to "000".
Custom Fields
- Summary: Every card will have its own four-digit CardPIN. In Card+PIN Operation Mode, users need to enter the CardPIN after flashing the card to the reader. This provides higher security.This article contains steps to setup the Verification Mode of Door Access to Card+Pin.
- Search Tags: cardPIN, high security mode, operation mode
Comments
-
There are no comments for this article.
Submit Feedback on this Article
