› Make sure the wiring connection is correct.
› Enter to Programming Menu to perform preferred Programming Mode.
Please complete the following steps below in order to resolve your issue.
- Please make sure the wiring connection is correct.
- See AA-00244 for the correct wiring connection diagram for XP-SR200K.
- See AA-00432 for the correct wiring connection diagram for XP-SR1000.
- Enter to Programming Menu.
- See AA-00260 for the steps.
- Please follow any preferred steps below after entering the Programming Menu.
AutoPIN | Steps |
---|
01...10: AutoPIN Location › Location number of 10 sets of AutoPIN. › Enter 0000 to erase the programmed AutoPIN.
| 1. Enter 2 digits number between 01 and 10. 2. Key in the 4 digits AutoPIN number. 3. Press # to confirm.
|
MasterPIN and SuperPIN | Steps |
51: MasterPIN › To change the MasterPIN number.
| 1. Press 51. 2. Key in the new 6 digits MasterPIN. 3. Press # to confirm.
|
52: SuperPIN › To change the SuperPIN number.
| 1. Press 52. 2. Key in the new 6 digits SuperPIN. 3. Press # to confirm.
|
Operation Mode | Steps |
61: AutoPIN Mode › To enable or disable AutoPIN mode. › After Coldstart, AutoPIN mode is OFF.
| 1. Press 61. 2. Press 1 to enable or 0 to disable AutoPIN mode. 3. Press # to confirm.
|
62: Security Mode › To turn ON or OFF security mode.
| 1. Press 62. 2. Press 1 for ON or 0 for OFF. 3. Press # to confirm.
|
63: Card+PIN Mode › To turn ON or OFF Card+PIN mode.
| 1. Press 63. 2. Press 1 for ON or 0 for OFF. 3. Press # to confirm.
|
64: Card Lock Out Mode › To turn ON or OFF Card Lock Out mode.
| 1. Press 64. 2. Press 1 for ON or 0 for OFF. 3. Press # to confirm.
|
Door Open Time & Lock Release Time | Steps |
71: Door Open Time › Specifies the duration for the door to be left open before the buzzer sounds.
| 1. Press 71. 2. Enter the required duration (0 - 99 sec.). 3. Press # to confirm.
|
72: Lock Release Time › Specifies the duration, after which the EM lock returns to locked state after being released.
| 1. Press 72. 2. Enter the required duration (0 - 99 sec.). 3. Press # to confirm.
|
Card Database | Steps |
81: Install Card › To program new cards to the system.
| 1. Press 81. 2. Key in a six digit card number or scan the new card to the reader. 3. Press # to confirm. 4. Press * to cancel operation.
|
82: Delete Card › To delete an existing card.
| 1. Press 82. 2. Key in a six digit card number or scan the card to be deleted to the reader. 3. Press # to confirm. 4. Press * to cancel operation.
|
83: Clear User DB › To clear the ENTIRE card database.
| 1. Press 83. 2. Press # to confirm the clearing of the ENTIRE card database in the reader. 3. Press * to cancel operation.
|